Pure Molybdenum, TZM Alloy, and Molybdenum-Lanthanum Alloy (MoLa) Tubes and pipes can be used under temperatures up to 1,800 degrees, in components of electron tubes, heaters of high-temperature furnaces thermocouple retainers, etc.
Moly tubes with small OD
Molybdenum tubes can also be used as a rotary target for coating, which is widely used in solar industries.
Non-Ferrous Crucible Inc. (ETI) provides Moly tubes from forged rods and sintering directly. Mo tubes with OD smaller than 60mm are mostly machined and gun-drilled from the forged rod, tubes with larger diameters are sintered per size directly. The process methods of the Moly tube and crucible are always for saving cost and according to the customer’s requirement.
The smallest tube we can carry is 0.187” outer diameter with 0.025” wall thickness, largest can be with 500mm outer diameter. We can also provide TZM alloy tubes and Mo-La alloy tubing but with a more narrow size range. The hardness of TZM Alloy is higher and it’s harder to be machined. The minimum OD for the TZM alloy tube and Mo-La tube is 10mm, length will be limited according to OD and wall thickness.
Specification for our Moly tube
| Shape | Tube |
| Material | Mo, 99.95% |
| Size | 0.187”-20” OD, 106” max length. Max Length: 3000mm for molybdenum tube as a single piece |
| Process | Sintered, gun drilling |
| Surface | Finish turning for the outer surface, Drilling for the inner surface |
| Related product | TZM Tube, Mo-La Tube, Molybdenum Crucible, Molybdenum Rod |
Types of Mo and Mo Alloy Tubes
We can also provide welding Moly tubes and riveting tubing that is made by sheet and strip. These kinds of large molybdenum tubes are used as molybdenum heat shielding.
Mo tube parts
Tubes with holes, threaded holes, etc. can be produced according to drawings.
-Pressed and sintering Tubes
The powder is pressed and sintered into its final shape. They are one of the most popular types of crucibles. Used to make larger pipes
-Milling Tube
Material blanks are processed into final products. This type of molybdenum tube is also very popular. Used to make smaller tubes.
-Welding and Riveting Liner
For larger Tubes with thinner walls, we recommend Welding and Riveting Liner
Please send us your specifications for the molybdenum tube to inquiry.crucible@winnewtech.com.
Packaging for our Mo tube
The standard package for the Moly tube, TZM Alloy Tube, and Mo-La alloy tube is a wooden crate so that the goods can be protected during handling and transportation.
Please send your request to inquiry.crucible@winnewtech.com, and we will reply you within 3 minutes
inquiry.crucible@winnewtech.com
Non-Ferrous Crucible Inc.
Tel: +86-755-84112759
Fax: +86-755-84112759
No. 7, Gongye 2nd Road, Jinsha, Kengzi, Pingshan, Shenzhen, China.
518122
inquiry.crucible@winnewtech.com
